Installing the GPS Receiver Testing the complete installation and locking the transducer position NOTE: Accessories may require a separate purchase. You can visit our Web site at humminbird.com to order these accessories online or contact our Customer Resource Center at 1-800-633-1468.
Temperature Graph (Sonar View only, with Temperature input) Settings: Off, On, Default = On Temperature Graph Down Imaging Beam Width (Advanced) Settings: Narrow, Medium, Wide; Default = Wide Down Imaging Beam Width Contour Mode (Side Imaging® View only) Settings: On, Off; Default = Off Contour Mode Navigation Menu Tab...
Appendix A Transducer Mounting Template: XHS 9 HDSI 180 T Remove and use for Transducer Installation Use 5/32” drill bit. Drill Drill Drill PLACE EITHER CORNER ON DEADRISE ANGLE NOTE: If you are reproducing or printing this template from an electronic file, start with the following print settings: Scale = None, Paper = 8.5 x 11 inches, Layout = Portrait.
Need help?
Do you have a question about the 1158? combo and is the answer not in the manual?
Questions and answers