Incontinence Cover; Settings; Prerequisites; Basic Functions Of The Kimba Neo Seating Unit - Otto Bock Kimba Neo Instructions For Use Manual

Settings

73

7.16 Incontinence cover

The installation is usually carried out by the user's attendant.
For mounting information, see the Instructions for Use (User) - reference number 647G892.
8 Settings

8.1 Prerequisites

WARNING
Incorrect settings
Tipping, falling or malposition of the user due to incorrect adjustment or installation
► Adjustment and installation work may not be completed by the product user but only by trained, qualified per­
sonnel.
► Only the settings described in these instructions for use may be implemented.
► Verify safe functioning before handing over the wheelchair.
CAUTION
Unsecured screw connections
Pinching, crushing, tipping over, falling of user due to assembly errors
► After all adjusting/readjusting work, retighten the mounting screws/nuts firmly. Observe any torque settings
which may be specified.
► Any time you loosen a screw connection with thread lock, replace it with a new screw connection with thread
lock or secure the old screw connection with medium strength thread locker (e.g. Loctite®241).
CAUTION
Improper use of self-locking nuts
Tipping, falling over of the user due to screw connections coming loose
► Always replace self-locking nuts with new self-locking nuts after disassembly.

8.2 Basic functions of the Kimba Neo seating unit

INFORMATION
The product can be equipped with the Kimba Neo seating unit or alternative seating systems. In this case, please
observe the information in the separate instructions for use for the seating system.

8.2.1 Adjusting the seat depth

1) Loosen the 2 wing nuts on the underside of the seat (see fig. 74, item 1).
2) Adjust the seat depth by moving the footrest (see fig. 75).
3) Hand-tighten the wing nuts.
32 Kimba Neo