Platform For Respirator; Cup Holder - Otto Bock Kimba neo Instructions For Use Manual

6.8.15 Platform for Respirator

WARNING
Use in a wheelchair accessible vehicle is forbidden
Severe injury in case of accidents
► Use of the product in wheelchair accessible vehicles in combination with the artificial respiration platform
option is not permitted.
INFORMATION
The respiration platform cannot be used on a product with fixed front wheels.
The respiration platform is for attaching respiration equipment. This is secured with belts using the slots on the res­
piration platform.
The option has been installed in the following way, depending on the order:
• Installation of the large plate over the front wheels (see Fig. 86) – the user sits in the seat facing away from the
direction of travel
• Installation of the large plate over the rear wheels (see Fig. 87) – the user sits in the seat facing in the direction
of travel
The seating unit can only be turned around if the respiration platform is moved.
INFORMATION: in this case, contact the qualified personnel who adjusted your product.

6.8.16 Cup Holder

The cup holder (see Fig. 88) is for holding a drinking bottle within reach of the user or the attendant. It can be
placed as required on the push bar, on the folding tube or on the grab rail.
Installing the cup holder
1) Only when the tube is vertical: secure the self-adhesive hook-and-loop straps in the desired position and at
the correct distance apart. These secure the cup holder when the bottle is full.
2) Secure the cup holder with the hook-and-loop straps in the desired position.
Kimba neo
85
86
Usage
87
Ottobock | 39