Security Firewall Name <Name - Brocade Communications Systems 5600 vRouter Configuration Manual

security firewall name <name>
Creates and names a firewall rule.
Syntax
set security firewall name
delete security firewall name [
show security firewall name
Parameters
name
Multi-node. The name of a firewall rule set. The name must not contain a space or any other of the following special
characters: |, ;, &, $, <, or >. The name can be as many as 28 characters long.
You can define more than one firewall rule set by creating more than one name configuration node.
Modes
Configuration mode
Configuration Statement
security {
firewall {
name name
}
}
Usage Guidelines
Use this command to create and name a firewall rule set. A firewall rule set is a named collection of as many as 9,999 packet-
filtering rules. Following the configurable rules is an implicit rule, rule 10000, which denies all traffic.
Use the set form of this command to create and name a firewall rule set.
Use the delete form of this command to delete to a firewall rule set.
Use the show form of this command to display a firewall rule set.
52
name
name ]
Firewall Commands
Brocade 5600 vRouter Firewall Configuration Guide
53-1004253-01