Security Firewall Name <Name> Rule <Rule-Number> Disable - Brocade Communications Systems 5600 vRouter Configuration Manual

security firewall name <name> rule <rule-number> disable
Disables the specified IP firewall rule.
Syntax
set security firewall name
delete security firewall name
show security firewall name
Command Default
The rule is enabled.
Parameters
name
The name of a firewall rule set.
rule-number
The numeric identifier of a rule. The identifier ranges from 1 through 9999.
Modes
Configuration mode
Configuration Statement
security {
firewall {
name name {
rule rule-number {
}
}
}
}
Usage Guidelines
Use this command to disable an IP firewall rule. Disabling a firewall rule is a useful way to test how the firewall performs minus a
specific rule without having to delete and then re-enter the rule.
Use the set form of this command to disable a firewall rule
Use the delete form of this command to delete a firewall rule.
Use the show form of this command to display a firewall rule.
Brocade 5600 vRouter Firewall Configuration Guide
53-1004253-01
name rule rule-number disable
name rule rule-number disable
name rule rule-number
disable
Firewall Commands
61