Monitor Protocol Ospfv3 Disable Route - Brocade Communications Systems 5600 Configuration Manual

monitor protocol ospfv3 disable route

Disables the generation of debug messages related to OSPFv3 route calculations.
Syntax
monitor protocol ospfv3 disable route [ ase | ia | install | spf ]
Command Default
Debug messages are disabled for OSPFv3 route calculations.
Parameters
ase
Disables detailed debugging of OSPFv3 external route calculations.
ia
Disables detailed debugging of OSPFv3 inter-area route calculations.
install
Disables detailed debugging of OSPFv3 route installation.
spf
Disables detailed debugging of OSPFv3 Shortest Path First (SPF) calculation.
Modes
Operational mode
Usage Guidelines
Use this command to disable the generation of debug messages related to OSPFv3 route calculations.
Brocade 5600 vRouter OSPFv3 Configuration Guide, 5.0R1
53-1004503-01
OSPFv3 Commands
37