Local Port @ Modbus
Click the "Status" column to view the current serial port type.
3.7 – Network
3.7.1 - Network > Route
This section allows you to set the static route. Static route is a form of routing that occurs when a
router uses a manually-configured routing entry, rather than information from a dynamic routing
traffic. Route Information Protocol (RIP) is widely used in small network with stable use rate. Open
Shortest Path First (OSPF) is made router within a single autonomous system and used in large
network.
3.7.1.1 – Static Route
Click + to add Static Route. The windows will appear as below. Configure the static route according
Multimax_user manual_v.4.0.4
Confidential
Enter the local port of under Modbus mode.
July. 11, 2018
Null
60/139
Need help?
Do you have a question about the multimax+ and is the answer not in the manual?