Checking The Frame; Checking The Swingarm; Checking The Throttle Cable Routing - KTM Freeride 250 F 2018 Owner's Manual

12.37

Checking the frame

12.38

Checking the swingarm

12.39

Checking the throttle cable routing

–
Check the frame for cracking and deformation.
» If the frame exhibits cracking or deformation due to a
mechanical impact:
–
Change the frame.
F01161-01
–
Check the swingarm for damage, cracking, and deformation.
» If the swingarm shows signs of damage, cracking, or defor-
mation:
–
Change the swingarm.
F01162-01
Preparatory work
–
Fold the seat up. (
–
Remove the fuel tank.
Main work
–
Check the throttle cable routing.
Both throttle cables must be routed to the throttle valve
body side by side behind the handlebars and below the seat
fixing.
» If the throttle cable is not routed as specified:
–
Correct the throttle cable routing.
F01163-01
Finishing work
–
Install the fuel tank.
SERVICE WORK ON THE CHASSIS 12
Info
Always replace a frame that has been dam-
aged due to a mechanical impact. Repair of the
frame is not authorized by KTM.
Info
Always change a damaged swingarm. Repair of
the swingarm is not authorized by KTM.
p. 64)
( p. 70)
( p. 72)
79