Installing The Air Filter - KTM Freeride 250 F 2018 Owner's Manual

Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.
12.25

Installing the air filter

Preparatory work
–
Fold the seat up. (
–
Remove the air filter housing.
Main work
–
Take off pre-filter
–
Press the air filter housing
clockwise direction.
–
Remove the air filter
–
Take off air filter
E01000-10
Main work
–
Mount the clean air filter onto the air filter support.
–
Apply grease to the air filter around area
Long-life grease (
B01757-10
–
Insert both parts together and close air filter housing
turning clockwise.
Info
If the air filter is not mounted correctly, dust and dirt
may enter the engine and cause damage.
M00507-10
Finishing work
–
Install the air filter housing.
–
Lock the seat. (
SERVICE WORK ON THE CHASSIS 12
p. 64)
( p. 66)
1
.
2
together and open in counter-
3
with the air filter support
3
from air filter support
A
p. 146)
( p. 66)
p. 64)
4
.
4
.
.
1
by
67