KTM Freeride 250 F 2018 Owner's Manual page 96

13 BRAKE SYSTEM
94
–
Remove cotter pin
–
4
Remove pin
–
Take off retainer spring
–
Clean the brake caliper.
E01018-10
–
Position new brake linings.
Info
Always change the brake linings in pairs.
E01019-01
–
Position retaining spring
–
4
Mount pin
Info
To make it easier to mount the pin, push the retainer
spring down.
Make sure the retaining spring is seated correctly.
–
Mount cotter pins
E01018-10
–
Operate the foot brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.
–
Add brake fluid to level
Brake fluid DOT 4 / DOT 5.1 (
–
Position the cover with the washer and membrane
–
Mount and tighten screws
Info
Clean up overflowed or spilled brake fluid immediately
with water.
E01015-10
3
.
.
5 and remove the brake linings.
5
.
.
3 .
A
.
p. 144)
1
.
2 .