12.16
Removing the shock absorber
12.17
Installing the shock absorber
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Fold the seat up. (
Main work
–
Detach brake line
–
Remove screw
–
Remove screw
as far as possible without blocking the rear wheel. Secure the
rear wheel in this position.
–
Remove screw
–
Push splash protector
F01209-10
absorber.
Main work
–
Push splash protector
absorber. Mount and tighten screw
Guideline
Screw, top
shock absorber
–
Mount and tighten screw
Guideline
F01209-11
Screw, bottom
shock absorber
Info
The heim joint for the shock absorber at the swingarm
is Teflon-coated. It must not be greased with grease,
nor with any other lubricants. Lubricants dissolve the
Teflon coating, thereby drastically reducing the service
life.
–
Mount and tighten screw
Guideline
Screw, upper
subframe
–
Attach brake line
Finishing work
–
Lock the seat. (
–
Remove the motorcycle from the lift stand. (
SERVICE WORK ON THE CHASSIS 12
p. 64)
1
.
2
.
3
and lower the rear wheel with the swingarm
4
.
5
to the side and remove the shock
1
to the side and position the shock
2
.
M12
80 Nm (59 lbf ft)
3
.
M12
80 Nm (59 lbf ft)
4
.
M10
45 Nm (33.2 lbf ft)
5
.
p. 64)
p. 53)
Loctite
®
2701™
Loctite
®
2701™
Loctite
®
243™
p. 53)
63