6 CONTROLS
6.12
6.13
18
E00979-10
Closing the filler cap
E00978-10
Cold start button
H02565-10
Preparatory work
–
Fold the seat up. (
p. 64)
Main work
–
1
Press release button
, turn the filler cap counterclockwise,
and lift it free.
Main work
–
Replace the filler cap and turn clockwise until the release but-
1
ton
locks in place.
Info
Run the fuel tank breather hose
Finishing work
–
Lock the seat. (
p. 64)
1
The cold start button
is fitted on the bottom of the throttle
valve body.
The injection system extends the injection time if the engine is
cold and the outside temperature is low. To help the engine burn
the increased amount of fuel, it must be supplied with additional
oxygen by pushing the cold start button.
After briefly opening up the throttle and then releasing the throttle
grip again, or turning the throttle grip towards the front, the cold
start button returns to its original position.
Info
Check whether the cold start button has returned to its
basic position.
Possible states
The cold start button is activated – The cold start button is
•
pushed in all the way.
The cold start button is deactivated – The cold start button is
•
in its basic position.
2
without kinks.