Changing The Fuses Of Individual Power Consumers - KTM Freeride 250 F 2018 Owner's Manual

15.5

Changing the fuses of individual power consumers

Info
The fuse box containing the fuses of individual power consumers is located under the seat.
Tip
Insert a spare fuse so that it is available if needed.
–
Mount the protection caps.
Finishing work
–
Install the shock absorber.
–
Lock the seat. (
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Turn the key in the ignition lock to the position
engine is idling.
–
Fold the seat up. (
Main work
–
Pull EFI control unit
–
Open fuse box cover
E01027-10
–
Remove the faulty fuse.
Guideline
Fuse 1 - 10 A - EFI control unit, lambda sensor, injection
valve, combination instrument, diagnostics connector
Fuse 2 - 10 A - high beam, low beam, parking light, tail
light, license plate lamp
Fuse 3 - 10 A - horn, turn signal, brake light, radiator fan
Fuse 4 - 10 A - fuel pump
E01028-10
Fuses res – 10 A – spare fuses
Info
You can recognize a faulty fuse by a burned-out fuse
A
wire
Warning
Fire hazard Incorrect fuses overload the electrical sys-
tem.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
–
Use spare fuses with the correct rating only.
ELECTRICAL SYSTEM 15
( p. 63)
p. 64)
p. 64)
1
off the holder and hang to the side.
2
.
.
p. 53)
while the
105