Changing The Main Fuse - KTM Freeride 250 F 2018 Owner's Manual

15 ELECTRICAL SYSTEM
15.4
104

Changing the main fuse

Warning
Fire hazard Incorrect fuses overload the electrical system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
Info
The main fuse protects all power consumers of the vehicle. It is located behind the battery.
E01025-10
E01026-10
The charging time may be longer at low temperatures.
This battery charger is not suitable for the trickle
charging of lithium-ion batteries.
Info
Never remove cover
–
Switch off the battery charger after charging and disconnect
from the battery.
Finishing work
–
Install the battery. (
Preparatory work
–
Turn the key in the ignition lock to the position
engine is idling.
–
Raise the motorcycle with a lift stand. (
–
Fold the seat up. ( p. 64)
–
Remove the shock absorber.
Main work
–
1
Take off protection caps
–
Remove faulty main fuse
Info
You can recognize a faulty fuse by a burned-out fuse
A
wire .
3
A spare fuse is located in the starter relay.
–
Install a new main fuse.
Fuse (58011109120) (
–
Check that the electrical system is functioning properly.
1 .
p. 102)
while the
p. 53)
( p. 63)
.
2
.
p. 140)