KTM Freeride 250 F 2018 Owner's Manual page 61

–
Tighten screw
Guideline
Screw, top steering
head
F01208-10
–
Mount and tighten screw
Guideline
Screw, top
steering stem
F01208-11
–
Using a plastic hammer, tap lightly on the upper triple clamp
to avoid stresses.
–
Tighten screws
Guideline
Screw, top triple
clamp
F01207-10
–
Secure cable holder
–
Insert the fuel tank breather hose into the steering head screw.
F01203-11
–
Position the brake caliper. Mount and tighten screws
the spacers.
Guideline
Screw, front
brake caliper
–
Connect plug-in connector
–
Position the brake line, wiring harness, and clamp. Mount and
tighten screws
F01200-11
Finishing work
–
Install front fender. (
–
Install the front wheel.
–
Install the headlight mask with the headlight. (
SERVICE WORK ON THE CHASSIS 12
4
.
M20x1.5 12 Nm (8.9 lbf ft)
7
.
M8 17 Nm (12.5 lbf ft)
8
.
M8 22 Nm (16.2 lbf ft)
9 in front of the right and left radiator.
M8 25 Nm (18.4 lbf ft)
bl
and mount the cable tie(s).
bm
.
p. 62)
( p. 95)
Loctite 243™
®
bk with
Loctite ® 243™
p. 107)
59