Installing The Battery; Recharging The Battery - KTM Freeride 250 F 2018 Owner's Manual

15 ELECTRICAL SYSTEM
15.2
15.3
102

Installing the battery

E00982-10
E00980-11

Recharging the battery

Warning
Risk of injury Batteries contain harmful substances.
–
Keep batteries out of the reach of children.
–
Keep sparks and open flames away from the batteries.
–
Only charge batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable materials when charging batteries.
Minimum clearance
–
Do not charge deeply discharged batteries if charge is already below the minimum voltage.
Minimum voltage before the start of the charge
–
Dispose of batteries with less than the minimum voltage correctly.
–
Position the positive cable and mount and tighten the screw.
Guideline
Screw, battery termi-
nal
Battery (HJTZ5S-FP) (
Info
A
Contact disks
1
screw and the cable lug
the battery terminal.
–
Slide positive terminal cover
–
Position the negative cable and mount and tighten the screw.
Guideline
Screw, battery termi-
nal
Info
A
Contact disks
1
screw and the cable lug
the battery terminal.
–
Position the battery in the battery compartment.
–
4
Attach fastening plate
–
Mount and tighten screw
1 m (3 ft)
9 V
M5 2.5 Nm
(1.84 lbf ft)
p. 140)
must be mounted under the
2
with the claws toward
3
over the positive terminal.
M5 2.5 Nm
(1.84 lbf ft)
must be mounted under the
2
with the claws toward
.
5
.