Installing The Fork Protector; Removing The Fork Legs - KTM Freeride 250 F 2018 Owner's Manual

12.6

Installing the fork protector

12.7

Removing the fork legs

–
Remove screws
tector.
F01202-10
–
Position the fork protection on the right fork leg. Mount and
tighten screws
Guideline
Remaining screws,
chassis
F01202-11
–
Position the fork protection on the left fork leg. Mount and
tighten screws
Guideline
Remaining screws,
chassis
–
Position the brake line, wiring harness, and clamp. Mount and
tighten screws
F01187-11
Preparatory work
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
Remove screws
–
Remove the cable tie(s) and detach plug-in connector
–
Remove screws
caliper.
–
Allow the brake caliper and brake line to hang loosely to the
side.
F01199-10
SERVICE WORK ON THE CHASSIS 12
3
on the right fork leg. Take off the fork pro-
1
.
M6 10 Nm (7.4 lbf ft)
2
.
M6 10 Nm (7.4 lbf ft)
3
.
( p. 95)
1
and take off the clamp.
3
with the spacers and take off the brake
p. 106)
p. 53)
2
.
55