KTM Freeride 250 F 2018 Owner's Manual page 126

18 SERVICE WORK ON THE ENGINE
124
Main work
–
Place a suitable container under the engine.
–
Remove oil drain plug
Info
Do not remove screws
E00990-10
–
Remove screw plug
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing surfaces.
E00991-10
–
Position oil screen
–
Position the pin wrench through the drill hole of the screw plug
in the opposite section of the engine case.
–
Push the oil screen all the way into the engine case.
E00994-10
–
Mount and tighten screw plug
Guideline
Screw plug, oil
screen
–
Mount and tighten oil drain plug
new seal ring.
Guideline
Oil drain plug with
F01216-10
magnet
–
Remove screws
E00992-10
1
with the magnet and seal ring.
2 .
3 4
with oil screen and the O-rings.
4
with the O-rings on a pin wrench.
3 with the O-ring.
M20x1.5 15 Nm (11.1 lbf ft)
1
with the magnet and a
M12x1.5 20 Nm (14.8 lbf ft)
5
. Remove the oil filter cover with the O-ring.