11 SERVICE WORK ON THE CHASSIS
11.42
11.43
11.44
76
F03682-01
Checking the frame
F03645-01
Checking the link fork
F03646-01
Checking the throttle cable routing
Warning
Danger of accidents The throttle cable can become kinked, trapped or blocked if it is not routed cor-
rectly.
If the throttle cable is kinked, trapped or blocked, the speed can no longer be controlled.
–
Make sure that the throttle cable routing and the play in throttle cable complies with the specifica-
tion.
–
Check that the chain guide is firmly seated.
»
If the chain guide is loose:
–
Tighten the screws on the chain guide.
Guideline
Remaining screws,
chassis
Remaining nuts,
chassis
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Check the frame for damage, cracks, and deformation.
»
If the frame shows signs of damage, cracks, or deforma-
tion:
–
Change the frame.
Guideline
Repairs on the frame are not permitted.
–
Check the link fork for damage, cracks, and deformation.
»
If the link fork shows signs of damage, cracks, or deforma-
tion:
–
Change the link fork.
Guideline
Repairs on the link fork are not permitted.
Preparatory work
–
Remove the seat. (
p. 60)
–
Remove the fuel tank.
M6
10 Nm
(7.4 lbf ft)
M6
10 Nm
(7.4 lbf ft)
p. 48)
(
p. 68)