15 ELECTRICAL SYSTEM
15.11
15.12
110
Adjusting the headlight range
E00975-10
Changing the combination instrument
E01031-10
E01032-10
E01033-10
Preparatory work
–
Check the headlight setting. (
Main work
–
Loosen screw
1
.
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on the
lower marking for a motorcycle with rider (instructions on
how to apply the marking: Checking the headlight setting).
Info
A change in weight on the vehicle may require a correc-
tion of the headlight range.
–
1
Tighten screw
.
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Remove screws
1
.
–
Pull the combination instrument upward out of the holder.
–
Using a coin, turn protection cap
wise and remove it.
–
Remove combination instrument
–
Insert the new battery with the label facing outward.
Combination instrument battery (CR 2430) (
–
Check the O-ring of the protection cap for correct seating.
–
2
Position protection cap
using a coin.
–
Press any button on the combination instrument.
The combination instrument is activated.
–
Position the combination instrument in the holder.
–
Mount and tighten the screws with washers.
p. 109)
p. 106)
2
all the way counterclock-
3
.
p. 140)
and turn all the way clockwise