Adjusting The Rebound Damping Of The Fork; Handlebar Position - KTM Freeride 250 F 2018 Owner's Manual

11.13

Adjusting the rebound damping of the fork

Info
The hydraulic rebound damping determines the fork suspension behavior.
11.14

Handlebar position

–
Turn red adjusting screw
Info
Adjusting screw
right fork leg.
The rebound damping is located in right fork leg REB
(red adjusting screw). The compression damping is
located in left fork leg COMP (white adjusting screw).
–
Turn counterclockwise by the number of clicks corresponding
F01197-10
to the fork type.
Guideline
Rebound damping
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclock-
wise to reduce damping.
On the upper triple clamp, there are two holes at a distance of
to each other.
A
Hole distance
The holes on the handlebar supports are placed at a distance
B
of from the center.
B
Hole distance
The handlebar supports can be mounted in four different posi-
tions.
H02563-10
TUNING THE CHASSIS 11
1
clockwise as far as it will go.
1
is located at the upper end of the
23 clicks
20 clicks
15 clicks
15 mm (0.59 in)
3.5 mm (0.138 in)
A
51