Idle Speed Adjusting Screw; Shift Lever - KTM Freeride 250 F 2018 Owner's Manual

6.14

Idle speed adjusting screw

6.15

Shift lever

The idle setting of the throttle valve body has a big influence on
the vehicle's starting behavior, on stable idling, and on vehicle
response when the throttle is opened.
An engine with a correctly set idle speed is easier to start than an
engine with the idle speed set incorrectly.
The idle speed is adjusted using the idle speed adjusting
1
screw .
Increase the idle speed by turning the idle speed adjusting screw
clockwise.
Decrease the idle speed by turning the idle speed adjusting screw
counterclockwise.
H02565-11
Shift lever 1 is mounted on the left side of the engine.
401950-10
The gear positions can be seen in the photograph.
The neutral or idle position is between the first and second gears.
401950-11
CONTROLS 6
19