Checking The Rear Brake Linings; Changing The Rear Brake Linings - KTM Freeride 250 F 2018 Owner's Manual

13 BRAKE SYSTEM
13.12
13.13
92
E01015-10

Checking the rear brake linings

Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized KTM workshop will be
glad to help.)
E01016-10

Changing the rear brake linings

Warning
Danger of accidents Incorrect maintenance will cause the brake system to fail.
–
Ensure that service work and repairs are performed professionally. (Your authorized KTM workshop
will be glad to help.)
Main work
–
Stand the vehicle upright.
–
1
Remove screws .
–
Take off the cover with the washer and membrane
–
Add brake fluid to the mark
Brake fluid DOT 4 / DOT 5.1 (
–
Position the cover with the washer and membrane.
–
Mount and tighten the screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
–
Check the brake linings for minimum thickness
A
Minimum thickness
» If the minimum thickness is less than specified:
–
Change the rear brake linings.
–
Check the brake linings for damage and cracking.
» If damage or cracking is visible:
–
Change the rear brake linings.
2
.
A
.
p. 144)
A
.
≥ 1 mm (≥ 0.04 in)
( p. 92)
( p. 92)