Checking The Riding Sag Of The Shock Absorber; Adjusting The Spring Preload Of The Shock Absorber - KTM Freeride 250 F 2018 Owner's Manual

11 TUNING THE CHASSIS
11.8
11.9
48

Checking the riding sag of the shock absorber

400990-10

Adjusting the spring preload of the shock absorber

Caution
Risk of injury Parts of the shock absorber will move around if the shock absorber is detached incorrectly.
The shock absorber is filled with highly compressed nitrogen.
–
Please follow the description provided. (Your authorized KTM workshop will be glad to help.)
Info
Before changing the spring preload, make a note of the present setting, e.g., by measuring the spring
length.
–
Measure distance A of rear wheel unloaded. (
–
With another person holding the motorcycle, the rider, wear-
ing full protective clothing, sits on the seat in a normal sitting
position (feet on footrests) and bounces up and down a few
times.
The rear wheel suspension levels out.
–
Another person now measures the distance between the rear
axle and the fixed point.
–
Note down the value as dimension
Info
The riding sag is the difference between
A
measurements
–
Check the riding sag.
Riding sag
» If the riding sag differs from the specified measurement:
–
Adjust the riding sag.
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Fold the seat up. ( p. 64)
–
Remove the shock absorber.
–
After removing the shock absorber, clean it thoroughly.
p. 46)
C
.
C
and .
95 mm (3.74 in)
( p. 49)
p. 53)
( p. 63)