Lubricating The Steering Head Bearing; Removing The Shock Absorber - KTM 450 RALLY FACTORY REPLICA 2023 Owner's Manual

12.13

Lubricating the steering head bearing

12.14

Removing the shock absorber

–
Remove motorcycle from the lift stand. (
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
Info
The steering head bearing is cleaned and lubricated in
the course of removal and installation of the lower triple
clamp.
H02387-01
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Fold out the side stand and secure it.
–
Remove the seat. (
–
Remove main silencer. (
Main work
–
Remove screws
F02403-10
–
Carefully lower rear fuel tank
L03049-10
–
Remove screw
Info
Raise the link fork slightly to be able to remove the
screw more easily.
L03050-10
SERVICE WORK ON THE CHASSIS 12
( p. 59)
( p. 61)
p. 68)
p. 71)
1
.
2
.
3
with the washer.
p. 56)
p. 56)
65