Changing The Main Fuse - KTM 250 SX 2024 Owner's Manual

14.4

Changing the main fuse

Warning
Fire hazard Incorrect fuses overload the electrical system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
Info
The main fuse protects all electrical power consumers of the vehicle. It is located in the starter relay hous-
ing under the seat.
Guideline
The charging current, charging voltage, and charging
time must not be exceeded.
Maximum charging volt-
age
Maximum charging cur-
rent
Maximum charging time
Recharge the 12-V bat-
tery regularly when the
motorcycle is not being
used
Battery charger and tester (A54029974000)
This battery charger tests whether the 12-V battery
retains its voltage. It is also impossible to overcharge
the 12-V battery with this battery charger. The charging
time may be longer at low temperatures.
This battery charger is only suitable for lithium iron
phosphate batteries. Read the accompanying KTM Pow-
erParts instructions.
Info
Never remove cover
–
Switch off the battery charger after charging and disconnect
from the 12-V battery.
Finishing work
–
Install the 12-V battery.
–
Install the fuel tank. (
–
Mount the seat. ( p. 63)
Preparatory work
–
Press and hold the stop button
until the engine stops.
–
Remove the seat. ( p. 62)
–
Remove the fuel tank.
ELECTRICAL SYSTEM 14
14.4 V
3.0 A
24 h
6 months
1
.
( p. 101)
p. 71)
while the engine is idling
( p. 69)
103