Resetting The Lex Device - Motorola LEX L10i User Manual

Figure 76: Import/Export Contacts Popup
4 Select Import from .vcf file.
5 In the popup window, tap Allow.
6 In the folder that opens, select the .vcf file with contacts.
13.9

Resetting the LEX Device

Use this procedure to reset the LEX device.
When and where to use: If the device does not operate properly, perform the following procedure.
Procedure:
1 Power off and on the device and verify if the problem is gone.
The device restarts. If the problem remains, perform Step 2.
CAUTION: To avoid erasing important data from your device, do not press any of the
buttons during power up.
2 Press the Power button and hold it for 10 seconds.
The device restarts.
3 Remove the battery, reinsert it, and verify if the problem is gone.
The device restarts. If the problem remains, contact technical support.
Send Feedback
Chapter 13: Maintenance and Troubleshooting
MN003475A01-B
171