Led Indicators - Motorola FR6876 User Manual

LED Indicators

The FR6876 has three LED indicators. The Scan/Decode LED indicates status for bar code scanning. The
Charging/Battery Status LED indicates battery charging and status. The Radio Status LED indicates WAN radio
status. Table 2-6
LED Indicators
Figure 2-10
1. Scan/Decode LED
2. Charging LED
3. Radio Status LED
LED Indications
Table 2-6
LED status
Scan/Decode LED
Solid Green
Solid red
Off
Charging/Battery Status LED
Slow blinking amber
Solid green
Fast blinking amber
Off
Single blink amber (when power button is
pressed)
Blinking amber (when power button is
pressed)
Radio Status LED
Slow blink green
Slow blink red
Off
For information about scanning/decoding, see Data Capture on page 2-29. For information about WAN radio
NOTE
status and settings, see
describes the LED indications.
Indication
Successful decode/capture
Laser enabled, scanning in process
Not enabled
Main battery in FR6876 is charging.
Main battery in FR6876 is fully charged.
Charging error
Not charging
Battery depleted
Battery over-temperature condition
The radio (BT,WIFI,GPS,RIL) can work
correctly when it is on
Some radio (BT,WIFI,GPS,RIL) can not
work correctly when it is on.
All radio off.
Chapter 5, Using the
Using the FR6876
Phone, or refer to the FR6876 Integrator Guide.
34