®
CELL-DYN
3/35 Sample Loader TS Guide
d. Tighten hardware.
G Loader
a. While Tube is Rotating, loosen Mixing Paddle Assembly bracket screws
Page-3-88) and adjust Assembly to center tube in rack. Tighten hardware.
5. Go to
"VP - 6.3 Mixing Home Sensor Check/Adjustment" (Page
3
VERIFICATION PROCEDURESVP - 6.2 Mixing Head Position Adjustment
Search Book TOC Go Back
Tower Rear View
Paddle
Motor
Barcode
Reader
Figure 3-41 Back of Sample Loader
3-89).
(2) Ball Slide
Screws
SL-242
9140234B-June 1997
(Figure 3-43,
3 - 86