®
CELL-DYN
3/35 Sample Loader TS Guide
e. Place straight edge on platen against Beam Block and confirm Mixing Assembly is parallel
with the straight edge
•
If OK, go to Step
•
If not OK, go to
3
VERIFICATION PROCEDURESVP - 6.1 Mixing Head Position Check
(Figure
3-37).
2, Page
3-80, Mix Head Alignment Check.
"VP - 6.2 Mixing Head Position Adjustment" (Page
Ensure Paddle
is Parallel to
Ruler
Beam
Block
Platen Surface
Figure 3-37 Mixing Head Vertical Check
Search Book TOC Go Back
Ruler or
Straightedge
SL-241
9140234B-June 1997
3-85).
3 - 79