8-port E & M (TIE) trunk card. Type 5 support.
Accessory and User-supplied Items
Accessory (included): Screws × 2
User-supplied (not included): Amphenol connector
Connect this optional service card to the trunk through terminal board from the E & M
(TIE) line; do not connect to the trunk directly.
To connect the Amphenol connector, refer to "2.2.10 Fastening Amphenol Type
To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "2.13.1
Starting the Hybrid IP-PBX".
2.4 Installation of the Trunk Cards — KX-TDA100/KX-TDA200
To terminal board from the E & M (TIE) line