2.2 Installation of the Hybrid IP-PBX — KX-TDA100/KX-TDA200
Hook the cabinet onto the metal bracket, making sure that the unit slides down and onto
the hooked parts of the metal bracket. Use 2 screws (B) to fix both sides of the cabinet.
Do not block the openings of the cabinet. Allow space of at least 20 cm above and 10
cm at the sides of the cabinet.
Make sure that the wall behind the cabinet is flat and free of obstacles, so that the
openings on the back of the cabinet will not be blocked.
Make sure that the wall behind the cabinet is not made of wood.
Be careful not to drop the cabinet.