Panasonic KX-TDA30 Installation Manual page 56

Hybrid ip-pbx

Hide thumbs Also See for KX-TDA30:

Table of Contents

2.2 Installation of the Hybrid IP-PBX — KX-TDA100/KX-TDA200

For every 4 cables, use 1 ferrite core; a ferrite core holds a maximum of 4 cables.

When connecting an extension card

Pass the cable through the ferrite core, then close the case of the ferrite core. Attach the ferrite

core 3 cm away from the connector.

If you need to open the ferrite core, use a flathead screwdriver to unlatch the case of the ferrite

Installation Manual

Show Quick Links

Table of Contents

Troubleshooting

Kx-tda200 Kx-tda100