8.1 Troubleshooting — KX-TDA30
PROBLEM
•
Noise is frequent while
using the PS.
•
Conversations
disconnect while using
the PS.
•
PS stays out of service
when the CS status is
changed from Out of
Service to In Service.
408
Installation Manual
PROBABLE CAUSE
•
Call handover is not
working.
•
PS is out of CS coverage
area.
•
It may take about 10 s
for CS to start up after
the status has been
changed to In Service.
SOLUTION
•
Locate the CS properly (refer to "6.7.5
Site Survey Using the KX-TCA255/KX-
TD7590" or "6.8.5 Site Survey" ).
•
Wait until the CS starts up.