2.2 Installation of the Hybrid IP-PBX — KX-TDA100/KX-TDA200
Installing/Removing the Optional Service Cards
To protect the back board from static electricity, do not touch parts on the back board in
the main unit and on the optional service cards. To discharge static electricity, touch
ground or wear an earthing strap.
The optional service cards can be installed or removed while the DC power is supplied.
However, when installing or removing the MPR card, the DC power supply must be turned
Installing Optional Service Cards
Insert the card along the guide rails.
KX-TDA100: Free Slots 1 to 5
KX-TDA200: Free Slots 1 to 10