Hybrid Ip-Pbx Maintenance - Panasonic KX-TDA30 Installation Manual

7.3.4

Hybrid IP-PBX Maintenance

This section briefly describes how to perform maintenance of the Hybrid IP-PBX using the KX-
TDA30 Maintenance Console when PC and the Hybrid IP-PBX are connected by USB cable.
For detailed descriptions of each feature and related PT programming, refer to the on-line help
at each screen.
7.3 Installation of the KX-TDA30 Maintenance Console
1. Start the KX-TDA 30 Maintenance Console
(refer to "Starting the KX-TDA30
Maintenance Console and Assigning the
Basic Items (Quick Setup)" in "7.3.1 Installing
and Starting the KX-TDA30 Maintenance
Console").
2. To diagnose a card:
Click "Utility"
bar.
3. a.
Click "Status" of the desired card and
change its status to "OUS".
b.
Click "Card Type" of the desired card.
The diagnosis screen appears.
To use other utility commands, click the
desired item in the step 2 above.
"Diagnosis" from the menu
Installation Manual 401