Panasonic KX-TDA30 Installation Manual page 150

2.8 Connection of DECT Portable Stations — KX-TDA100/KX-TDA200
3.
Repeat the steps 1 and 2 for other CSs, and relocate the CSs when necessary.
a.
Overlap adjacent CS coverage areas where the radio signal strength level is "8" by 5
m to 10 m.
Channel no. 0
b.
Overlap the CS coverage areas of at least 2 CSs at any location in the installation site.
Channel no. 0
Channel no. 2
c.
Make sure that the radio signal strength level is greater than "3" at any location in the
service area demanded by the user.
Notes
• If a channel is set, the results of measurement for the 24 slots on the channel are
saved each time. If the same channel is set, the new results override the previous
ones. Therefore, a measurement of 10 channels × 24 slots in total can be made.
• If correct results cannot be obtained (e.g., there are many error counters), change the
location of the CS and repeat the site survey to select the best location.
150 Installation Manual
5 m to 10 m
Channel no. 1
Channel no. 1
Channel no. 3