Panasonic KX-TDA30 Installation Manual page 273

Mounting on Concrete or Mortar Wall
CAUTION
Drive mounting screws into the wall. Be careful to avoid touching any metal laths, wire
laths or metal plates in the wall.
1.
Place the reference for wall mounting (on the last page of this manual) on the wall to mark
the 3 screw positions.
2.
Install three anchor plugs (user-supplied) in the wall.
Hammer
3.
Install the screws (included) in the wall.
Drive the screw
to this position.
4.
Hook the main unit on the screw heads.
130 mm
250 mm
Anchor Plug
6.4 mm
29 mm
6.2 Installation of the Hybrid IP-PBX — KX-TDA30
Installation Manual 273