Panasonic KX-TDA30 Installation Manual page 201

2.
Plug the AC power cord into the Hybrid IP-PBX and an AC outlet, and turn on the Hybrid
IP-PBX.
Note
For safety reasons, do not stretch, bend, or pinch the AC power cord.
To AC Outlet
3.
Press the Reset Button with a pointed tool. (The RUN indicator will flash.)
4.
While the RUN indicator is flashing (within about 10 s), return the System Initialise Switch
to the "NORMAL" position. Depending on the configuration, initialisation takes about 1 min
to 3 min. If successfully executed, the RUN indicator will stop flashing and be kept lit.
All data will be cleared, and the Hybrid IP-PBX as well as all optional service cards (except for
the IP-GW card) will be initialised to the default values. The DPTs should show the time as
01:00.
The data of the IP-GW card will not be initialised.
Notes
• Use only the AC power cord included with the Hybrid IP-PBX for the PSU.
• Use only the supplied AC power cord for the purpose of applying the EMC standard,
if the Hybrid IP-PBX is connected (Germany only).
LED Indications
Indication
RUN
ALARM
2.13 Starting the Hybrid IP-PBX — KX-TDA100/KX-TDA200
Colour Description
Green PBX status indication
• OFF: Power Off (includes normal reset)
• ON: Power On and running (on-line)
• Flashing (60 times per minute): Starting up
• Flashing (120 times per minute): Starting up or resetting with:
• the System Initialise Switch in "SYSTEM INITIALIZE"
position
• the SD Memory Card not inserted
Red Alarm indication
• OFF: Normal
• ON: Alarm (CPU stop, alarm for each card)
• Flashing: Alarm (MPR file error in restarting)
Installation Manual 201