Site Survey - Panasonic KX-TDA30 Installation Manual

2.9 Connection of 2.4 GHz Portable Stations — KX-TDA100/KX-TDA200
2.9.5

Site Survey

The PS has a Radio Signal Test mode that monitors the state of the radio link to the CS. After
installing the CSs temporarily, set the PS to the Radio Signal Test mode and measure each CS
coverage area. Then, record the results on the map of the installation site.
Testing the Radio Signal Strength
Note
The display language for the site survey is only in English.
1.
Enter the Radio Signal Test mode.
Using the KX-TD7680
Press 1, 9, and POWER
for more than 2 seconds.
Using the KX-TD7690
Press 1, 9, and POWER
for more than 2 seconds.
Notes
*1: CS number and radio signal strength level.
*2: Scan data (test result) number. Empty memory space will be indicated by a number;
stored memory space will be indicated by a "-".
174 Installation Manual
To store the scan data
Scan Data No.
0 to 9
To store the scan data
Scan Data No.
0 to 9
Display example:
CS No.
<< SEARCHING >>
1 to 9
Display example:
CS No.
<< SEARCHING >>
1 to 9
*
1
CS NO.1 LEVEL:12
*
2
SAVE:0123456789
*
1
CS NO.1 LEVEL:12
*
2
SAVE:0123456789