2.2 Installation of the Hybrid IP-PBX
2.2.7
Installing/Removing the Optional Service Cards
Slot Condition
Card Type
MPR Card
Trunk Cards
Extension Cards
OPB3 Card
CTI-LINK Card
CAUTION
To protect the back board from static electricity, do not touch parts on the back board in
the main unit and on the optional service cards. To discharge static, touch ground or wear
an earthing strap.
Note
The optional service cards can be installed or removed while the DC power is supplied.
However, when installing or removing the MPR card, the DC power supply must be
stopped.
Installing Optional Service Cards
1.
Insert the card along the guide rails.
44
Installation Manual
KX-TDA100: Free Slots 1 to 5
KX-TDA200: Free Slots 1 to 10
No
Yes
Yes
Yes
Yes
Guide Rail
Slot Type
Option Slot
No
No
No
Yes
Yes
MPR Slot
Yes
No
No
No
No