Site Survey - Panasonic KX-TD816 Installation Manual

5.2 Wireless System Installation

5.2.5 Site Survey

Site Survey Specification
The KX-TD7500 portable station has Radio Signal Test Mode which monitors the state of link
as one of the means to determine the site planning for the KX-TD142. In the mode, the frame
loss and signal strength of a synchronous slot, and the signal strength of the other slots can be
measured when the portable station is linking with the KX-TD142.
Flow Chart of the Site Survey
No
166
Check the Cell Station ID number.
Assign the Cell Station ID number to the PS.
Unplug the cable from the Cell Station.
Prepare the DIP-Switch of the Cell Station for
the Radio Signal Test mode.
Locate the Cell Station temporarily and con-
nect the AC power cord.
Survey the site using the PS.
Were the correct results obtained?
Disconnect the AC power cord, set the DIP-
Switch to the normal mode, and plug in the
cable.
Yes
DECT Installation