Adding User Ids; Editing User Information - GE Sievers 900 Series Operation And Maintenance Manual

17. Press the Login button and enter the new User ID and Password you just created.
18. Select the DataGuard tab.
19. Press the Edit User button.
20. Use the arrow buttons to highlight the default administrator account and press OK.
21. Press the User Status button and select Inactive.
22. Press the Menu button to return to the Menu screen.
Note: Once you inactivate the default administrator account, it cannot be used to access the
Analyzer. If you forget the login information for the new administrator account that
you have created, contact GE Analytical Instruments for assistance.

Adding User IDs

After DataGuard has been enabled, you can add a User ID by following these steps:
1. Select the DataGuard tab.
2. Press the Add User button.
3. Specify a new User ID and press the Enter button. (If you enter an existing User ID, an error
message will display.)
4. Specify the temporary Password for the new User ID and press Enter. Unless you change
the expiration status (see "Editing User Information" on page 128), the user will be required
to change the Password when logging in for the first time.
5. Verify the Password and press the Enter button.
6. The Edit User screen displays automatically. Press the Menu button to accept the default
user settings, or edit any of the user settings. For additional information, see Step 4 in
"Editing User Information" below.

Editing User Information

Once you have created a User ID, you can edit its account settings as follows. Note that when you
are adding a new User ID, you do not need to follow Steps 1 through 3, as the Edit User screen
automatically displays whenever a new User ID is created.
1. Select the DataGuard tab.
GE Analytical Instruments ©2009 128 of 236 DLM 90488-01 Rev. A