Table of Contents
Advertisement
6€ Tx MIDI Channel (MIDI output channel)
For each keyboard (upper, lower, and pedal
bass) you can specify the channel on which your
playing will be transmitted as MIDI messages.
(Value: 1-16)
When you use the MIDI connectors or the comput-
er connector of the AT-90 to transmit musical data
to external devices, make these MIDI channel set-
tings as necessary. (For details refer to p.59.)
Channe
It is not possible to set Upper, Lower, and Pedal
Bass to the same channel.
MIDI messages for the Solo part will be trans-
mitted only when To Lower is ON.
@ Master Tune
This function allows the master tuning to be set
at any value between 415.3 Hz and 466.2 Hz.
The instrument accepts settings in increments of
0.1 Hz.
By pressing the + and - Value buttons simulta-
neously, you can restore the default setting
(440.0 Hz).
This setting remains stored in memory even
while power is turned off.
O LCD Contrast
This setting allows you to adjust the contrast of
the display. (Available settings: 1-10)
This setting remains stored in memory even
while power is turned off.
54
| Settings for the Composer
| (Function button)
€ Count-in Recording
This setting (ON/OFF) determines whether or
not a metronome count-in (2 measures) will be
heard after pressing the Play button on record-
ing. (The count-in helps you establish the tempo
before you begin playing.)
1. Press the Function button.
2. Using the Select buttons, select "Count-In Rec."
3. Use the Bwd/Fwd buttons to turn it ON or OFF.
Press the Function button or the Display
/ Exit
button to return to the basic screen.
O Metronome
This setting determines whether or not the
metronome will sound.
REC : Heard only while recording
ON
: Heard constantly
OFF : Not heard at all
1. Press the Function button.
2. Using the Select buttons, select "Metronome."
3. Use the Bwd/Fwd buttons to select REC, ON, or OFF.
Press the Function button or the Display /Exit
button to return to the basic screen.
H
Advertisement
Table of Contents
