Changing The Reverb Depth (Assign 2: Reverb); Changing The Delay Depth (Assign 2: Delay); Controlling An External Midi Device (Assign 2: Ext Ctrl: External Control) - Roland Groovebox D2 Owner's Manual

Changing the reverb depth (ASSIGN 2: REVERB)

fig.REV—
* There will be no effect if [REVERB] is dark. Press [REVERB] to make it lit.
Display
TYPE
X
Y
Changing the D-FIELD settings (p. 22)
Making detailed settings
1. Hold down the D-FIELD function button [ASSIGN 2] and press [EDIT].
2. Press [ENTER] to select the desired parameter.
3. Turn [VALUE] to change the setting.
For details on the parameters and settings, refer to the explanation of reverb (p. 42).

Changing the delay depth (ASSIGN 2: DELAY)

fig.DLY—
* There will be no effect if [DELAY] is dark. Press [DELAY] to make it lit.
Display
TYPE
X
Y
Changing the D-FIELD settings (p. 22)
Making detailed settings
1. Hold down the D-FIELD function button [ASSIGN 2] and press [EDIT].
2. Press [ENTER] to select the desired parameter.
3. Turn [VALUE] to change the setting.
For details on the parameters and settings, refer to the explanation of delay (p. 43).

Controlling an external MIDI device (ASSIGN 2: EXT CTRL: External Control)

fig.EXT—
You can transmit control change messages to an external MIDI device.
Display
TYPE
X
Y
Changing the D-FIELD settings (p. 22)
Explanation
Select the type of reverb.
Select the parameter that will be affected
when you move your finger to left or right.
Select the parameter that will be affected
when you move your finger upward or
downward.
Explanation
Select the type of delay.
Select the parameter that will be affected
when you move your finger to left or right.
Select the parameter that will be affected
when you move your finger upward or
downward.
Explanation
Select the MIDI channel on which the messages will be
transmitted.
Select the control change number that will be transmit-
ted when you move your finger to left or right.
Select the control change number that will be transmit-
ted when you move your finger upward or downward.
Chapter 3. About the D-FIELD
Setting
ROOM1, ROOM2, STAGE1, STAGE2, HALL1, HALL2
Refer to the explanation of reverb (p. 42).
* When you change the type, the parameter whose setting is
followed by an "X" or "Y" will be selected automatically (X
= left/right, Y = up/down).
* It is not possible to select the same parameter for both X and
Y.
Setting
SHORT, LONG
Refer to the explanation of delay (p. 43).
* When you change the type, the parameter whose setting is
followed by an "X" or "Y" will be selected automatically (X
= left/right, Y = up/down).
* It is not possible to select the same parameter for both X and
Y.
Setting
CH1–CH16
1–5, 7–31, 64–95
* It is not possible to select the same control
change number for both X and Y.
39