Installing A Drive Blank - Dell EMC PowerEdge R6400 Installation And Service Manual

Figure 20. Removing a drive blank
Next step
1 Install a drive or a drive blank.
Related links

Installing a drive blank

Installing a drive blank
The procedure for installing 2.5 inch and 3.5 inch drive blanks is identical.
Prerequisite
Follow the safety guidelines listed in
CAUTION: Mixing drive blanks from previous generations of PowerEdge servers is not supported.
Step
Insert the drive blank into the drive slot, and push the blank until the release button clicks into place.
Figure 21. Installing a drive blank
Next step
If removed, install the front bezel.
Safety instructions.
Installing and removing enclosure components 43