Recommended Tools; Inside The Enclosure - Dell EMC PowerEdge R6400 Installation And Service Manual

Recommended tools

You need the following tools to perform the removal and installation procedures:
• Phillips #1 screwdriver
• Phillips #2 screwdriver
• 1/4 inch flat head screwdriver
• Wrist grounding strap
• ESD mat

Inside the enclosure

CAUTION: This system must be operated with the system cover installed to ensure proper cooling.
Figure 12. Inside the C6400 enclosure
1 sled (4)
3 fan cage (2)
5 right linking board
7 drive cage
9 left midplane
11 chassis management board
2 right midplane
4 fan (4)
6 backplane
8 expander board
10 left linking board
12 power interposer board
Installing and removing enclosure components 35