Installing The Backplane - Dell EMC PowerEdge R6400 Installation And Service Manual

Figure 60. Removing the backplane
Next step
Install the backplane.
Related links
Removing the 2.5 inch drive cage

Installing the backplane

Installing the backplane
Prerequisites
CAUTION: You must note the slot number of each drive and temporarily label them before removal so that you can replace them
in the same slots.
NOTE: Observe the routing of the cables on the chassis as you remove them from the system. You must route these cables
properly when you replace them to prevent the cables from being pinched or crimped.
Follow the safety guidelines listed in
78 Installing and removing enclosure components
Safety instructions.