Installing A Sled - Dell EMC PowerEdge R6400 Installation And Service Manual

Figure 15. Removing a sled blank
Next step
Install the sled into the enclosure.
NOTE: If the sled is not being replaced immediately, a sled blank must be installed to ensure proper cooling of the system.
Related links

Installing a sled

Installing a sled
Prerequisites
1 Follow the safety guidelines listed in
2 If installed, remove the sled blank.
Step
Slide the sled into the enclosure horizontally, ensuring that the sled is supported from beneath until it locks into place.
38 Installing and removing enclosure components
Safety instructions.