Installing The Right Midplane - Dell EMC PowerEdge R6400 Installation And Service Manual

Figure 47. Removing the right midplane
Next step
Install the right midplane.
Related links
Removing a sled
Removing the cooling fan cage

Installing the right midplane

Installing the right midplane
Prerequisite
NOTE: You must route the cables properly on the chassis to prevent them from being pinched or crimped.
1 Follow the safety guidelines listed in
Steps
1 Using the Phillips #1 screwdriver, connect and secure the power cables to the midplane.
2 Place the midplane into the chassis.
3 Using the Phillips #1 screwdriver, tighten the screws that secure the midplane to the chassis.
Safety instructions.
Installing and removing enclosure components 67